CameraLink Multiplexer (Camera Selector 4:1)

Model: CLM-30C4

Booth No: P824

Characteristic

Camera link is a connection method between a high-speed camera and an image acquisition device designed to apply high-efficiency image processing.
The CLM-30C4 can select one of the four Base/Medium/Full configuration camera signals and send it to the PC's Frame Grabber. Here, all the functions of RS232 and CC1~4 are actively selected as video signals, which are all signals that travel back and forth between the camera and Frame Grabber. The unused RS232 line signal is automatically set to Pull Up.

The transmission distance has the following frequency-dependent arrival distance characteristics.

Camera Frequency Max Cable Length
20 to 60 MHz 10 m
60 to 80 MHz 7 m
80 to 85 MHz 5 m

PoCL Bypass also supports the ability to perform PoCL functions from Frame Grabber to Camera. However, the camera power on the unselected camera side is turned off. In order to avoid this cut-off situation, separate power supply to the camera is required. It can be constructed as follows. (including camera signal amplification)