Double/Triple Head Both Side Brushing Machine

Model: ZEDSWEEP bm

Exhibitor: KUMAR ENGINEERING INDIA PVT. LTD.

Booth No: A039

Characteristic

MODEL : ZEDSWEEP BM
This Machine is used for sanding after dipping. Designed with two pairs of Abrasive Brushes with different grits, for creating coarse sanding through first pair of brushes, and fine-sanding through second pair of brushes. This is featured with both side sanding in one pass.
The Brushing Machine is fully capable to deliver the ultimate result for after dipping Ply sanding without any colour fading.
MODEL : ZEDSWEEP TBM
Triple Head Brush Sanding Machine is designed for sanding through brushes for the application of normal / moderate sanding result as brushes can provide just an abrasion sufficient for removal of glue impression but not as good as compared to sanding belt results. This model is best for low / medium cost plywood segment.
Working Thickness 4-100 mm
Working Width 200-1250 mm
No. of Heads Four
Top & Bottom - Head 1 Brushing with Brush Roller - 5 HP (3.7 KW) x 2 no.
Top & Bottom - Head 2 Brushing with Brush Roller - 5 HP (3.7 KW) x 2