WJ-M SERIES-THREE/SINGLE PHASE SCR POWER REGULATOR

Model: WJ3PSＭ

Booth No: S1211

Characteristic

With RS485 ModBus communication function, it could display the working current, output percent, internal temperature of the machine and various faults.

Settings of multiple functions and protection parameters:

Current limit, overload function setting, detection of overload current ratio, setting of time parameters.

Various fault indicators and protections:

Input power phase failure and out of phase indications, Overload protection、Overheating protection, and SCR

gateway short circuit protection.

3-phase power regulator with load disconnection detection that allows setup of sensitivity and effective time, with the
sensitivity that can detect one broken set of the 5 sets.

1-phase power regulator with load disconnection detection.

Start/stop delay time setting.

Provide signal input control of 4-20 mA, 0-5V, 1-5V, 0-10V, 2-10V.

Built-in intelligent overheat protection and indicator, equipped with intelligent cooling fan.

Fault output contact provided for emergency control of system in case of faults detected.

Built-in high-speed fuse especially for semi-conductor, to provide protection from short circuit.

Special use to Silicon carbon rod、molybdenum(IV) oxide load.