JK-SOFT STARTER SP SERIES OF PUMP MOTOR (COMPACT SERIES)

Model: SMC-SP系列

Booth No: S1211

Characteristic

Start time and torsion can be adjusted for starting motor smoothly.

The soft start can choose 4 starting models : total pressure starting, gradient starting, constant current starting, torque starting.

It’s controlled by SCR without access point, arc, and abrasion of light end, as semi-permanent use-life.

Easy wiring : the equipment of 3 in and 3 out, it can save the cost of labor wiring tedious.

This controller is 3 phases, 3 wires, 6 SCR thyristors for controlling by power.

This starter is micro-treater with auto revising of light/heavy loading and the control of torque.

Cooling fans has temperature control, the cooling sheet working at 55℃, and stop at 45℃, this design can extend use-life of fans 2-3 times. This controller has CT electronic inspection protectorjthe SP series have the protection of overload,

loss phase, motor block, over heating, motor running idling (Low load).

Motor overload, motor stuck, and motor low load can be setting by controller's internal DIP switch, and also can be hand reset by reset button. This controller offers 3 sets output connection : output connection of starting, output connection after

running (BY PASS), output connection of system exception.

This controller offers slow-stop function of pump motor to reach the best function of removing water hammer.

The EMC Directive 2014/30/EU.

Low Voltage Directive : 2014/35/EU.

This starter meets the standard of CE Certificate, EN/IEC 60947-1, EN/IEC 60947-4, EN/IEC 61000-6-4, EN/IEC 61000-4-2,

EN/IEC 61000-4-4,EN/IEC 61000-4-6, EN/IEC 61000-6-2 approved.