70H Full-featured digital type ABC tube 21 double-layer independent air chamber with 6" foam frame Hybrid type

Model: TS-70H

Exhibitor: TRUE SOURCE TECHNOLOGY CO., LTD.

Booth No: J506

Characteristic

 When the power outage, just wait for the power to be restored. Protection from bottoming out for at least 4 hours
 Pressure-sensitive digital pump start-stop control system to monitor operation at any time
 Hybrid 6-inch mattress (4" 21 cells + 6" high-density border sponge) Sitting border
 Sitting frame provides stable support and protection when sitting beside the bed for long periods of time
 Cooperate with Japanese professional assistive device manufacturers to develop M·able
 All-round mattress corresponding to low to high risks of bedsores
 A hybrid type of day-shaped trachea and foam, with upper foam pad, trachea, and side support pads
 Both excellent body pressure dispersion performance and stability, while maintaining comfort
 It does not allow local oppression or irritation of painful areas, and is as comfortable as a static mattress for a good sleep
 You can choose different modes to deal with relaxation, sleep, sitting, nursing, rehabilitation, etc.
 Easy to use, just enter your weight and it will automatically adjust to the optimal setting
 Manual fine-tuning, comfort setting points: soft, standard, hard
 In alternating mode, the interval between alternating inflating and deflating can be adjusted to the standard 5 minutes or 15 minutes
 In the static mode, the air cells of the entire mattress do not alternate and are automatically set according to the user's weight, giving the entire mattress relatively
stable support and softness, so that the body can be fully decompressed and protected
 Nursing mode, stable higher pressure of the entire mattress, easy to use for nursing and rehabilitation, automatically resumes previous operation after one hour
 Seat mode, a mode that improves the dispersion and stability of body pressure in the sitting position. (Can be used when raise the head of the bed.)
 Low pressure alarm, abnormal power outage alarm, reminder work abnormality handling mechanism
 The mute button can eliminate the alarm sound, but the warning light will continue to light until the crisis is resolved
 Lock key to avoid accidentally touching the set state
 The standby light flashes, indicating that the basic pressure value is being reached and inflation is in progress. When the light goes out, it is completed
 Memory recovery function can retain the original exclusive settings after an abnormal power outage
 Energy saving, non-24-hour inflation, stop when pressure reaches
 For safe care, the side support pads can reduce the chance of slipping when leaving the bed or sitting or lying on the side of the bed
 Multi-functional, highly elastic coverlet that is waterproof, moisture-permeable, flame-retardant, antibacterial, anti-mite, biocompatible,95°C machine washable, etc.
 The quick coupling also functions as a CPR emergency relief valve for easy management
 The rotary lower air chamber deflation valve is intuitive to operate. It is easy to deflate in emergencies and when retracting the bed. It must be closed for normal use.
 Quick coupling, quickly cover the included lid, which can retain the air in the bed for short-term support
 Handles on both sides make it easy to move to the required placement
 The anti-slip pad on the back of the bottom can increase the stability of placement
 ABC alternating support surfaces are more comfortable
 Replace system : Place the entire mattress directly on the hospital bed to replace the original sponge
 Product control interface human factors engineering makes operation more intuitive
 Complete power management mechanism, dual fuses, separate power connector and 3.5 or 5 -meter power cord
 Loading range 20-180 kg, initial value is 50 kg
 Products liability aggregate limit is US$500,000 and each Occurrence limit. (Worldwide exclouding USA/Canada and Taiwan)
 Passed the medical safety regulations and complied with QMS.ISO13485:2016 and EU CE MDR specification