Vertical Dehydrator
Model: KE
Category: PS-Plastic Injection Molding Machine
Exhibitor: CONG TY TNHH THUONG MAI MOC JI TIAN
Booth No: 170
Characteristic
After washing recycled plastic film materials, moisture is often retained above 30%. Therefore, it is necessary to use a centrifugal extractor so that the water and the mass of the material can be squeezed dry to increase the quality of the plastic particles. and efficiency of the extruder.
The dryness of the raw material reaches 95%. After extrusion, plastic scraps or flakes with much lower moisture content and higher density can be fed directly into the granule extruder. Its output can be up to 1,000 - 1,500 kg/hour, and the degradation of plastic pellets will be greatly reduced. Moreover, you do not need to increase the heating rate. The quality and validity of pellets and the efficiency of the extruder will improve with increased capacity.
Related Products
-
Central Supply System
-
Extrusion Production Line
-
Vibrating Screen Machine
-
Automatic Scrap Edge Recycling Machine
-
Industrial Chiller
-
Heavy Duty Crusher
-
Vertical Mixing Dryer
-
Central Dehumidification Drying System
-
Power Crusher
Products you may be interested in
Highest Rated Products