AUTO SPRAYING MACHINE
Model: SPM1300S
Category: Surface treatment & finishing lines
Exhibitor: QINGDAO GODN MACHINERY CO., LTD
Booth No: E55-1
Characteristic
1. Suitable Paint:PU,NC, AC water-base paint.
2. With pin type rod conveyor, no need cleaning system
3. Reciprocators adopt JAPAN PANASONICA control system. Max. speed can reach 100m/min. There are 2 reciprocating arms.
4. Each reciprocating arm can equip 4 guns.
5. The grating scanner at the entrance can measure the width of work piece to make the stroke of guns and turn on/off time more exact. And at the same time the waste is
reduced.
6. The spraying parameter is set by the operator on the Touch screen or Industrial PC
7. Using PLC control system makes it a simple and intuitive instrument to see.
8. The alarm lamp on the cabinet, when the device is overrun or fault, it will give alarm.
9. Double filtering of the inlet air and closed spraying room make the air cleaner in the room.
10. The filter replacement detection device to remind you when to change the filter cotton.
Related Products
Products you may be interested in
Highest Rated Products